DyMIX fusion

Processing system for 2-component adhesives and/or sealants with a volumetric dosing ratio of approx. 3 : 1 to approx. 15 : 1 from 250 kg drums for the base and 20 kg - 25 kg hobbocks with an inner diameter of 280 mm for the catalyst.

 

Technical design:

  1. Operation by touch panel
  2. Servo-hydraulically driven scoop piston pump for base dosing
  3. Servo motor driven gear metering pump for catalyst metering
  4. Dynamic one-way mixer
  5. Pressure-controlled base metering to avoid metering errors as far as possible in the area of the direction changeover points of the scoop piston pump
  6. Programmed material library with all dosing-relevant data of the most common materials
  7. Menu-guided metering control with semi-automatic metering correction
  8. Menu-guided container change
  9. Optional remote maintenance
  10. Optional fully automatic calibration
  11. Optional e-mail transmission of error messages

 

Technical data:

  1. Width: 1,000 mm
  2. Length without extension arm: 1,500 mm
  3. Height (approx.): 2,550 mm
  4. Delivery from pivot point (approx.): 2,840 mm
  5. Empty weight: 650 kg
  6. Operating voltage: 3 x 400 V~; 50 Hz; N; PE
  7. Back-up fuses: 16 A
  8. Connected load: 4,5 kVA
  9. Discharge capacity (approx.): 1,000 g/min.
  10. Line pressure (max.): 200 bar
  11. Compressed air supply (min.): 6 bar